Details
Category: _Certification Center
Published:
Hits: 10817

Information

On this page you'll find the standard training material for the training courses hosted by iNTACS®. 

License disclaimer:

The material is subject of annual license fees, for details see the FEE STRUCTURE (pdf download). The files are password protected and you will get the password, if you hold a valid license.

Using this training material without a valid license is a violation of intacs rules and has the following impact:

  • A training conducted without a valid license will be declared as invalid and the participants are not entitled to join the exam.
  • A trainer using material without a valid license might lose the instructor license.
  • A training provider using material without a valid license might lose the training provider accreditation.
Remark for local translations:

The reference material is always the original English version. iNTACS® does not warrant the correctness of translations into other languages. Only files relevant for the participants are translated, so keep in mind that the original version is still needed to conduct the training. It needs to be ensured, that a training provider conducting a training with translated material will provide the English version to the participants as well. If translated material is available for a training course, it will be listed in the respective training section. See also the procedure for translation of training material (pdf download).

The training material is stored in the intacs Teams system. If you have a valid licence but the link is not working, please use the contact data given at the bottom of this page. 

  

 

 
      

intacs® certified Process Expert (Automotive) Training

      

Filename / Link

Version

Language

Release Notes

      
PE-R2.2.zip 2.1 EN

Reason for Release:

  • Native speaker review implemented
  • Feedback from trainings conducted in Oct 2024 implemented
  • Module 4b: Scope reduction: Some very detailed slides related to verification were moved to the appendix (-> still in the same file, but content moved towards the end of this module and marked as not relevant for examination)
  • Module “PE-AS40-4c_Process Dimension_additional_processes” created, which covers additional processes outside of the recommended VDA scope (but without HWE and MLE processes).
  • Trial Exam was updated too. If Socrative tool is used, please upload the new version!
  • Beside these major changes, many small changes / updates conducted
      
PE-R2.2 JP.zip 2.2 JP translation based on english version 2.2       
 
      

intacs® certified Provisional Assessor (Automotive) Training

      

Filename / Link

Version

Language

Release Notes
 PA-AS40-R1.1_released.zip  1.1  EN  Provisional Assessor Training Material for ASPICE 4.0
PA40_JP_V1.1.zip 1.1 JP translation based on English version BL 1.1
        
 
      

intacs® certified Competent Assessor (Automotive) Training

      

Filename / Link

 Version

 Language

 Release Notes
CA 4.0 BL 11.zip 11 EN

Please Read the instructions carefully AFTER DOWNLOADING! There is a new regulatory according to this Training! 3 EE AT are necessary BEFORE participating the CA Training!

- Change request from VDA WG 13 implemented, this means slides about scoping added (see slides #43 to #4
 CA4.0-BL1.1JP.zip  11 JP   Japanese translation of Version 11 
 

intacs® certified Process Expert and Provisional Assessor Combined Training (Automotive)
     

Filename / Link

Version

Language

 Release Notes
PE-PA-AS40-R1.1.zip 1.0 EN - PE-PA-AS40_TrainerSchedule+Instructions_RL_1.0.xlsx → contains a schedule and guidelines for instructors on how to apply everything during the combined training.
- PE-PA-AS40-1_Introduction_v1.1.pptx → a separate introduction slide deck that also explains the combined exam.
        
 
      

intacs® Introduction to VDA Automotive SPICE®Guidelines 

      
 

Filename / Link

  

Version

Language 

  

Release Notes
 ASG_BL_1.5 English  1.5 EN   editorial changes and adaption to new intacs-layout
 ASG_BL_1.5 Japanese  1.5 JP   translation based on English version BL 1.5
        
    
      

intacs® certified Cybersecurity for Automotive SPICE® Training

      

Filename / Link

Version

Language

Release Notes
ACS_BL_3.0_EN.zip 3.0 EN

Update to ASPICE 4.0

Minor Updates
ACS_BL_3.0_EN.zip 3.0 JP translation into Japanese language based on English baseline 3.0
        
 
      

intacs® certified Agile SPICE® Training

      

Filename / Link

Version

Language

Release Notes
AgileSPICE v1.1.zip 1.1  EN

Agile SPICE is adapted to Automotive SPICE 4.0 structure and content

The mapping of BPs to ASPICE 4.0 has been adapted

Feedback from the previous application has been incorporated

Processes defined more clearly, precisely and straightforwardly

Exam questions has been revised
        
 
      

intacs® certified Automotive SPICE® 4.0 Upgrade Training

      

Filename / Link

Version

Language

Release Notes
UPD-AS40_R2.0.zip 2.0  EN Upgrate after feedback received from VDA WG 13 and from various training providers
UPD-AS40_R2.0 JP.zip 2.0 JP Japanese translation based on English version 2.0
        
 
      
 

intacs® certified Data Management SPICE® Training

      

Filename / Link

Version

Language

Release Notes
intacs_DM_SPICE_V20_ExpertTraining_V200_20251008.zip 2.0 EN  Update to PAM V2.0 and new exercise scenario, added slides to scoping and interfaces to other models
       
  
 
      
 

intacs® certified SPICE®for IT Services Training

      

Filename / Link

Version

Language

Release Notes
 S4IT_BL_01.0_EN.zip 1.0 EN  Initial Version
       
  
 
      

intacs® certified Hardware SPICE® Training

      
 

Filename / Link

Version

Language

  

Release Notes
 HWS_R3.0_EN.zip 3.0 EN  

The Hardware SPICE training material is updated for Automotive SPICE® 4.0 and intacs® Hardware SPICE 3.0. As instructor you should use the new material up from September 1st 2024. You might do that even without specific Train the Trainer Update from version 2.1 to 3.0, as there are only small changes in the training material.

The exam can be done with VDA-QMC or ECQA depending on the question if participants have a Automotive SPICE® certification (VDA-QMC) or other SPICE certification (ECQA).

As training provider, please ensure to have a license to use the training materials by the certification body, where the participants are going to do the exam.
        
 
      

intacs® certified Automotive SPICE® Potential Analysis

      

Filename / Link

Version

Language

Release Notes
PoA_v10_Release_v1.1.zip 1.1 EN

Reason for Release:

  • Initial release of PoA training material for training providers after performance of Pilot Training and Train-the-Trainer trainings.
        
 
      
  

intacs® certified Mechanical Engineering SPICE® Training

      
 

Filename / Link

Version

Language

Release Notes

      
 ME_SPICE_2_0.zip 2.0 EN PAM completely revised. Reduction to 5 processes. Merging and updating the base practices. Additional updates of the base practices in order to align with Automotive SPICE® 4.0      
        
 
      
 

intacs® certified ISO33061 Upgrade Training

      

Filename / Link

Version

Language

Release Notes
 UPISO330.zip 1.0 EN  

This training enables all certified assessors for ISO/IEC 15504 to upgrade to the new standard of ISO/IEC 330xx. It builds on the existing assessor classification and focus on the following changes:

  • Assessor Certification Rules
  • Introduction to the ISO/IEC TS 33061 and ISO/IEC 33020 (compared to ISO/IEC 15504)
  • Concept changes Capability Level 1 up to 5
  • Significant changes regarding Process Dimension
  • Significant changes regarding Quality Dimension

 

 

 For any questions regarding the course material please contact the working group lead of the working group "intacs® Training Management", This email address is being protected from spambots. You need JavaScript enabled to view it. (current substitute This email address is being protected from spambots. You need JavaScript enabled to view it.) or raise a ticket in the ticket system (opens in new window).

Details
Category: _Certification Center
Published:
Hits: 23761

  • iNTACS e.V. is the scheme holder (see article "intacs® in a Nutshell), i.e. those fees are defined by the corresponding certification bodies in a free market situation.

  • iNTACS e.V. does not warrant the correctness of the information given below. Please visit the web pages of your certification body for latest information:

The version 5.5 fee structure was replaced by version 5.6.
 
intacs_fee_structure_EN_v5_9.pdf
Popular 734.4 KB 		19/09/2025 15:52:40
intacs_Gebuhrenordnung_DE_v5_9.pdf
Popular 740.04 KB 		19/09/2025 15:53:07
 
 
 

Subcategories

Procedures

iNTACS procedures, forms and regulations

International Assessor Certification Scheme

iNTACS articles grouped by categories. If you are looking for a specific article, try using the search function.